SmartNA™ Breakout, Aggregation, Regeneration TAP Modules

Product Details

All of the SmartNA™ Modular TAPs are fully configurable, allowing them to work in any datacenter configuration. Each module can be set up as a breakout TAP, an aggregating TAP, a SPAN Aggregator, a SPAN Regenerator or a combination of these.

Network Critical’s Fail-Safe technology ensures the TAPs will not introduce a point of failure into your network. Even if power is lost to the TAP, the network link will remain open, allowing your network to continue to flow.

SmartNA™ Modular TAPs are hot-swappable, allowing them to be used interchangeably with any of the SmartNA™ Chassis. This introduces a degree of flexibility into your network access solution which is not available with other products. Once you have installed the Smart Network Access System into your infrastructure, changes can be made easily, economically and without interrupting your network traffic.

Product Variants:
SNAM-RJRJ2: Breakout, Aggregating & Regenerating TAP Module - 10/100/1000 TAP with programable Bi-directional Monitor Ports - 10/100/1000 TAP & 2 RJ-45 10/100/1000 Ports
SNAM-RJSF2: Breakout, Aggregating & Regenerating TAP Module - 10/100/1000 TAP with programable Bi-directional Monitor Ports - 10/100/1000 TAP & 2 SFP Ports
SNAM-MCRJ2: Breakout, Aggregating & Regenerating TAP Module - Multi-mode Gigabit Fiber TAP with optical splitters (50/50) (LC Connectors) & 2 RJ-45 10/100/1000 Ports
SNAM-MCSF2: Breakout, Aggregating & Regenerating TAP Module - Multi-mode Gigabit Fiber TAP with optical splitters (50/50) (LC Connectors) & 2 SFP Ports
SNAM-MPRJ2: Breakout, Aggregating & Regenerating TAP Module -‐(SPAN Applications) 2 Multi-mode Fiber Ports with programmable Bi-directional Monitor Ports & 2 RJ-45 10/100/1000 Ports
SNAM-MPSF2: Breakout, Aggregating & Regenerating TAP Module -‐(SPAN Applications) 2 Multi-mode Fiber Ports with programmable Bi‐directional Monitor Ports & 2 SFP Ports
SNAM-SCRJ2: Breakout, Aggregating & Regenerating TAP Module - Single mode Gigabit Fiber TAP with optical splitters (50/50) (LC Connectors) & 2 RJ-45 10/100/1000 Ports
SNAM-SCSF2: Breakout, Aggregating & Regenerating TAP Module - Single mode Gigabit Fiber TAP with optical splitters (50/50) (LC Connectors) & 2 SFP Ports
SNAM-SPRJ2: Breakout, Aggregating & Regenerating TAP Module -‐(SPAN Applications) 2 Single mode Fiber Ports with programmable Bi-directional Monitor Ports & 2 RJ‐45 10/100/1000 Ports
SNAM-SPSF2: Breakout, Aggregating & Regenerating TAP Module -‐(SPAN Applications) 2 Single mode Fiber Ports with programmable Bi-directional Monitor Ports & 2 SFP Ports
SNAM‐MCRJV: Breakout & Aggregating TAP Module - Multi-mode Gigabit Fiber TAP with optical splitters (50/50) (LC connectors) & 2 RJ‐45 10/100/1000 Monitoring Ports, supports Link Failure Propagation, Aggregation & Breakout monitor modes (Supports oversized frames and passes all errors)
SNAM‐MCSFV: Breakout & Aggregating TAP Module‐- Multi-mode Gigabit Fiber TAP with optical splitters (50/50) (LC connectors) & 2 SFP Monitoring Ports, supports Link Failure Propagation, Aggregation & Breakout monitor modes (Supports oversized frames and passes all errors)
SNAM‐SCRJV: Breakout & Aggregating TAP Module - Single mode Gigabit Fiber TAP with optical splitters (50/50) (LC connectors) & 2 RJ‐45 10/100/1000 Monitoring Ports, supports Link Failure Propagation, Aggregation & Breakout monitor modes (Supports oversized frames and passes all errors)
SNAM‐SCSFV: Breakout & Aggregating TAP Module - Single mode Gigabit Fiber TAP with optical splitters (50/50) (LC connectors) & 2 SFP Monitoring Ports, supports Link Failure Propagation, Aggregation & Breakout monitor modes (Supports oversized frames and passes all errors)