SmartNA™ Aggregating Backplane TAP Modules
Product Details
All of the SmartNA Modular TAPs are fully configurable, allowing them to work in any datacenter configuration. Each module can be set up as a breakout TAP, an aggregating TAP, a SPAN Aggregator, a SPAN Regenerator or a combination of these.
Network Critical’s Fail-Safe technology ensures the TAPs will not introduce a point of failure into your network. Even if power is lost to the TAP, the network link will remain open, allowing your network to continue to flow.
SmartNA Modular TAPs are hot-swappable, allowing them to be used interchangeably with any of the SmartNA Chassis. This introduces a degree of flexibility into your network access solution which is not available with other products. Once you have installed the Smart Network Access System into your infrastructure, changes can be made easily, economically and without interrupting your network traffic.
Product Variants:
SNAM-RJRJ4: SmartNA™ Fully Configurable 10/100/1000 Copper Module with (4) RJ-45 ports
SNAM-RJSF4: SmartNA™ Fully Configurable 10/100/1000 Copper Module with (2) RJ-45 ports & (2) SFP cages
SNAM-MCRJ4: SmartNA™ Fully Configurable Passive Fiber TAP Module with (2) 1000Base-SX Multi-mode fiber ports (designed with optical splitters) & (2) Copper RJ-45 Ports
SNAM-MCSF4: SmartNA™ Fully Configurable Fiber Passive TAP Module with (2) 1000Base-SX Multi-mode fiber ports (designed with optical splitters) & (2) SFP cages
SNAM-MPRJ4: SmartNA™ Fully Configurable Fiber Module with (2) 1000Base-SX Multi-mode fiber ports & (2) Copper RJ-45 Ports
SNAM-MPSF4: SmartNA™ Fully Configurable Fiber Module with (2) 1000Base-SX Multi-mode fiber ports & (2) SFP cages
SNAM-SCRJ4: SmartNA™ Fully Configurable Fiber Passive TAP Module with (2) 1000Base-LX Single mode fiber ports (designed with optical splitters) & (2) Copper RJ-45 Ports
SNAM-SCSF4: SmartNA™ Fully Configurable Fiber Passive TAP Module with (2) 1000Base-LX Single mode fiber ports (designed with optical splitters) & (2) SFP Ports
SNAM-SPRJ4: SmartNA™ Fully Configurable Fiber Module with (2) 1000Base-LX Single mode fiber ports & (2) Copper RJ-45 Ports
SNAM-SPSF4: SmartNA™ Fully Configurable Fiber Module with (2) 1000Base-LX Single mode fiber ports & (2) SFP Ports
Features and Benefits
| Breakout TAP |
Breaks out full-duplex traffic into separate streams (Rx & Tx) |
| Aggregation TAP |
Aggregates network traffic from multiple live sources, TAP ports and SPAN ports, into a single output stream |
| Regeneration TAP |
Regenerates traffic to multiple streams |
| Backplane Aggregation |
Aggregate traffic from multiple modules across high speed switch fabric with true non-blocking performance |
| Fail-safe Protection |
Industry-leading technologies ensure absolute minimal interruption to the live network |
| Modular Format |
Tailor a custom solution to meet your specific demands |
| Configurable Settings |
Configure for your specific needs today. Reconfigure as your network changes |