That's So 80's!

 
  • martedì 4 ottobre 2011
    By: Dan O'Donnell

    It is time to take a trip in the Wayback Machine. Do you remember your first cell phone? It weighed a few pounds, was as big as a brick and had no apps. But you marveled over the new invention and the clarity of the communication. That was because, compared to the pay phone, walkie-talkie or pager, it was a technological leap of unimaginable proportion. On top of that, it was a major status symbol to have that little antenna on your back windshield. So, comparing that cell phone to previous technology, it looked pretty good.

    Now what happens when you compare it forward to, say, an iPhone? Obviously, it does not compare nearly as favorable. It looks heavy, awkward, expensive and of extremely limited functionality.

    Here is another 80’s communication marvel, the Digital PBX. Wow, if you were working in an office at that time it changed the way you did business. There were features like integrated Voice Mail so you could get detailed voice messages if you were not at your desk rather than a stack of those little paper slips stuck on a sharp pole near an inbox. There were also a host of other productivity improving features for the office worker. The Digital PBX was smaller than its analog predecessors (1 refrigerator-sized cabinet compared to 7 refrigerators for analog), used less power and could easily add lines by plugging in additional cards on the shelf.

    Once again, let’s compare it to today’s soft switches and VoIP systems. Of course, the forward comparison has the old Digital PBX looking expansive, expensive, slow and inflexible.

    Now let’s reset the time machine to present day and look at a typical data access switch architecture using shelf and cards in a rack. Compared to the expensive, refrigerator-sized cabinets of the past, the shelf and cards look pretty good.
    Over the years, they have increased density up to about 8, sometimes 12, ports per card allowing perhaps 48+ ports per shelf. Each shelf uses only about 5 Rack Units for its row of cards and less power than the standalone cabinets. The feature content allows for increased productivity in the data center by enabling efficient utilization of network tools and appliances.

    Looking forward, however, the shelf and card systems may be going the way of the refrigerator-sized cabinets and cell phone bricks of the 80’s. As new technology and innovative designs update architecture, density, power consumption and flexibility continue to improve. One example is the AFS system by Network Critical. The AFS is a new data access switch that provides a non-blocking 960Gbps backplane with 48 10Gbps access ports in a single, yes ONE, rack unit of valuable data center space. The fully-functional, fully-loaded system consumes only 150 watts using its dual redundant power supplies. The cost per port is a dramatic reduction from the legacy shelf and card systems as well.

    It is fun to look back in time to gauge our technological progress. However, the moral of this story is that it is easy to compare today to yesterday because we have 100% visibility. When investing for the future, whether it is equipment, money or people, one is well served by changing the paradigm of analysis. Do not use yesterday as your baseline, use tomorrow.

Contact Us